Multi-site network projects for Adelaide businesses
WaTo designs and builds networks that connect multiple business locations into a single, secure environment. Whether you're linking two offices across Adelaide or connecting a dozen sites across the state, we handle the full project: network design, hardware procurement, VPN or SD-WAN configuration, firewall rules and ongoing monitoring. Your team gets one network that works the same wherever they are.
Last updated
The short answer
To connect several offices, branches or venues into one secure network, WaTo Consulting in Adelaide designs the network first, then sets up site-to-site VPN or SD-WAN, firewalls and hardware at every site. Each location is installed and tested before handover, and all sites are monitored from one console afterwards.
What is a multi-site network project?
A multi-site network project connects two or more business locations (offices, warehouses, retail shops, branches) so they can share files, applications, printers and phone systems as if they were all in the same building. This is done through site-to-site VPNs, SD-WAN or private links that create encrypted tunnels between each location's network. The result is a single, unified network spread across multiple physical sites.
What we deliver
Network design and scoping
A tailored network design covering topology, IP addressing, routing, bandwidth requirements and security, documented before any hardware is purchased.
Site-to-site VPN configuration
Encrypted VPN tunnels between your locations so traffic flows securely over standard internet connections, without needing expensive private links.
SD-WAN deployment
For businesses needing smarter routing: SD-WAN appliances that prioritise critical traffic, failover between connections and simplify management across many sites.
Firewall and security rules
Firewalls at each site configured with consistent security policies, controlling what traffic flows between locations and what stays local.
Hardware procurement and install
Routers, switches, firewalls, access points and cabling sourced, configured and installed at every site, built to the same standard across your network.
Monitoring and management
All sites monitored from a single console, with connection health, bandwidth usage, device status and security alerts visible in one place.
Who it's for
- Businesses with two or more offices that need to share files, applications and phone systems across locations.
- Retail or hospitality groups connecting multiple shops or venues to a central management system.
- Organisations opening a new branch or warehouse and needing it connected to the existing network.
- Companies with remote or regional sites that need reliable, secure access to head-office systems.
How it works
- We assess your sites and requirements. A review of each location: existing internet connections, current network gear, applications that need to work across sites, and any bandwidth or latency requirements.
- We design the network. A documented network design covering topology, IP schemes, VPN or SD-WAN approach, firewall rules, redundancy and hardware specifications for each site.
- We build and pre-configure hardware. Routers, firewalls and switches configured at our workshop with VPN tunnels, security policies and monitoring already in place, ready for on-site install.
- We install at each site. Hardware deployed at every location, cabled, connected and tested, including end-to-end connectivity checks between all sites before handover.
- We monitor and manage ongoing. Centralised monitoring across all sites with proactive alerts, plus remote troubleshooting and on-site support when needed.
Why WaTo for multi-site networks
- We design the full network before touching any hardware, so every site connects cleanly and nothing gets retrofitted later.
- We work with Ubiquiti, MikroTik, Fortinet, Cisco and other brands, and we pick what suits your budget and requirements rather than our margin.
- Every site is built to the same standard, with the same naming conventions, security policies and monitoring, so your network is consistent.
- Adelaide-based with the ability to deploy to regional and interstate sites through pre-configuration and remote management.
- We've been building business networks since 2001, from two-site VPNs to multi-location SD-WAN rollouts.
Multi-site network questions
Do we need special internet connections at each site?
Not usually. Site-to-site VPNs work over standard business internet: NBN, fibre, 4G/5G. We'll check each site's connection speed and reliability and recommend upgrades only if the current service won't handle the traffic.
What's the difference between a VPN and SD-WAN?
A site-to-site VPN creates an encrypted tunnel between two routers, which is simple and cost-effective for a few sites. SD-WAN adds intelligent routing, automatic failover and centralised management, so it's better suited to businesses with many sites or critical cloud applications.
Can remote staff connect to the network too?
Yes. We can configure client VPN access so remote workers connect securely from home or on the road, accessing the same files and systems as if they were in the office.
How long does a multi-site network project take?
A two-site VPN can be designed and deployed within a week or two. Larger rollouts with five or more sites typically take four to eight weeks depending on site access and internet provisioning lead times.
Services behind these jobs
Ready to connect your sites?
Get in touch and we'll design a multi-site network that ties your locations together securely.
Mon to Fri, 8:30am to 5pm
