Wi-Fi heatmapping in Adelaide
Before you buy more access points or move your router again, find out what's actually happening with your wireless signal. We survey Adelaide offices, warehouses and commercial spaces with professional heatmapping tools, giving you a colour-coded map that shows exactly where coverage is strong, where it's weak and what needs to change.
Last updated
On-site work from $180 an hour, Adelaide metro travel included. Remote work from $115 an hour. See all our prices
The short answer
To find Wi-Fi dead spots, get a heatmap survey before buying more access points. WaTo Consulting walks Adelaide offices, warehouses and commercial spaces with professional survey tools and produces a colour-coded floor plan showing signal strength, interference and channel congestion, plus recommended access point positions. After changes, they resurvey to confirm the fix worked.
What is Wi-Fi heatmapping?
A Wi-Fi heatmap is a visual map of your wireless signal strength overlaid on your floor plan. We walk through your space with survey equipment, measuring signal levels, interference and channel congestion at every point. The result is a colour-coded picture (green where coverage is strong, red where it's poor) so you can see at a glance where the problems are and what needs fixing.
What we cover
Signal strength mapping
Every area of your space measured and mapped so you can see exactly where Wi-Fi reaches and where it drops off.
Interference detection
Neighbouring networks, Bluetooth devices and other sources of interference identified and accounted for.
Channel analysis
We check which channels are congested and recommend the best ones for your access points to use.
Dead spot identification
Problem areas pinpointed on your floor plan with clear explanations of what's causing the coverage gap.
Access point placement recommendations
Where to put new access points (or move existing ones) based on real survey data, not guesswork.
Before-and-after validation
After changes are made, we resurvey to prove the fix worked and hand you an updated heatmap.
Who it's for
- Adelaide offices where staff complain about slow or patchy Wi-Fi in certain areas.
- Warehouses and large commercial spaces that need reliable wireless coverage across a big footprint.
- Businesses planning a Wi-Fi upgrade that want to get access point placement right the first time.
- Fit-outs and new office builds where wireless needs to be designed before the ceiling goes in.
How it works
- We get your floor plan. A building plan or a rough sketch is all we need to start. We can measure up on site if you don't have one.
- We walk and measure. Our engineer walks the space with survey tools, capturing signal data at regular intervals across every room and corridor.
- We generate the heatmap. Your floor plan overlaid with colour-coded signal data showing coverage, interference and problem areas.
- We recommend fixes. A plain-English report with access point positions, channel settings and any infrastructure changes needed.
- We validate the result. After installation or changes, we resurvey to confirm coverage meets the target, using measured data rather than assumptions.
Why WaTo for heatmapping
- We survey with professional tools, not a free phone app, so the data is accurate and the recommendations are reliable.
- The same team that surveys can install and configure the fix, without handing you off to another company.
- Adelaide owned since 2001. We've surveyed offices, warehouses, schools and retail spaces across the city.
- You get a clear visual report you can actually understand, not a spreadsheet full of dBm readings.
- We validate after the fix so you know the money was well spent, rather than just trusting that it worked.
Wi-Fi heatmapping questions
How long does a Wi-Fi heatmap survey take?
A typical office takes one to two hours on site. Larger spaces like warehouses or multi-floor buildings take longer. We'll give you a time estimate before we come out.
Do we need to turn anything off during the survey?
No. We survey your network in its normal working state so the results reflect real conditions. That's the whole point.
Can you survey before we've installed any Wi-Fi?
Yes. A predictive survey uses your floor plan and building materials to model where access points should go before anything is installed, which is great for new fit-outs.
What do we get at the end?
A colour-coded heatmap on your floor plan, a summary of findings and a clear list of recommendations: access point positions, channel settings and any changes needed.
How do I find Wi-Fi dead spots in my office?
A Wi-Fi heatmap survey measures the signal across your floor plan and shows the weak and dead areas in colour. It also explains why they are weak, so you fix the cause instead of moving the router around.
Do I need a heatmap before buying more access points?
It is the cheapest way to avoid buying the wrong thing. The survey shows how many access points you need and where they should go, so you only buy what will make a difference.
Guides on this topic
Ready to see what your Wi-Fi is really doing?
Book a heatmap survey and we'll show you exactly where the problems are and how to fix them.
Mon to Fri, 8:30am to 5pm
