Business Wi-Fi upgrade in Adelaide
A focused Wi-Fi improvement service for workplaces where coverage, speed or reliability is getting in the way of work.
Last updated
On-site work from $180 an hour, Adelaide metro travel included. Remote work from $115 an hour. See all our prices
The short answer
Patchy office Wi-Fi usually comes down to too few access points, walls or shelving, neighbouring networks or one old router doing everything. WaTo Consulting surveys Adelaide workplaces room by room, installs properly placed business access points with separate staff, guest and device networks, then retests the problem spots.
What does a business Wi-Fi upgrade involve?
An upgrade starts with a walk through the site to measure signal and see what is causing the drop-outs, whether that is walls, interference or one tired router trying to cover everything. We then install properly placed business access points, often UniFi or similar, and set up separate networks for staff, guests and devices like printers and cameras.
What WaTo can help with
Coverage review
Find the dead spots, congestion and layout issues causing trouble.
Right equipment
Choose access points and network gear appropriate to the space and people using it.
Secure setup
Separate staff, guest and important device traffic where needed.
After-install testing
Check that coverage works in the rooms and areas that matter.
Who it is for
- An office where video calls freeze in the back rooms but work fine near the router
- A cafe, clinic or venue offering guest Wi-Fi on the same network as the business computers
- A warehouse or factory floor where scanners and tablets lose connection between aisles
- A growing team that added people and devices but never changed the Wi-Fi
How it works
- We survey the site. Signal strength is measured room by room and we note building materials, nearby networks and where people actually work.
- We plan access point placement. You get a layout showing how many access points are needed, where they go and whether new cabling is required.
- The new equipment is installed and configured. Access points are mounted, cabled and set up with separate staff, guest and device networks.
- We test coverage in the places that matter. We check each work area, meeting room and problem spot again, and adjust placement or settings if any are still weak.
Why WaTo for a business Wi-Fi upgrade
- We find the cause of the problem first, so you only buy the equipment the space needs
- Guest and staff traffic are kept apart, which protects business computers from visitors' devices
- We test coverage after installation in the rooms you flagged, not just near the access points
- A real person in Adelaide answers when a corner of the office goes quiet again
Business Wi-Fi upgrade questions
How many access points does our office need?
It depends on the floor area, the building materials and how many people connect at once. A survey gives the answer, and it is often fewer than people expect once each one is placed well.
Do access points need cabling?
Ideally, yes. A cable to each access point gives the most reliable speed and also powers it. Where cabling is not practical, wireless mesh links can work, with some loss of speed.
Can we keep using our current network name and password?
Usually, yes. Keeping the same name and password means most devices reconnect on their own. We often take the chance to change the password if it has been shared widely over the years.
What causes the Wi-Fi drop-outs that an upgrade fixes?
The usual causes are too few access points for the space, walls or shelving blocking the signal, neighbouring networks on the same channels, or an old router trying to do everything. We check the site, find which of these is causing it and fix that, rather than guessing with a new box.
Why is the Wi-Fi slow in some rooms but fine in others?
That is almost always coverage. The signal is weak by the time it reaches those rooms, so devices connect at low speed or keep switching. A coverage review shows where the gaps are and where an access point would fix them.
Will a new router fix our Wi-Fi?
Sometimes, but often not. One router in a corner rarely covers a whole workplace well. Most offices need a few properly placed access points, set up together, which is what this service is for.
Related services
Guides on this topic
- Why is my business Wi-Fi slow or dropping out?
- How to secure business Wi-Fi without making it hard to use
- What a small-business network audit should actually check
Ready to get your business Wi-Fi upgrade sorted?
Tell us where the Wi-Fi drops out or slows down and roughly how many people use it. We will work out whether the fix is placement, settings or new equipment.
Mon to Fri, 8:30am to 5pm
